Operating the Machina Corp X-Series 3D Printer – One Page Cheat Sheet – This document is to be printed, placed by the machine and used as a reference guide to operate the Machina X-Series 3D printer.
File Download -> View/Download Operating Cheat sheet in PDF Format
Slic3r Configuration files (for Slic3r version 1.0 stable)
Following links contain recommended Slic3r (version 1.0 stable) configuration files for XSeries and XSeries Pro Machina Corp 3D Printers. Each folder contains 4 configuration files:
1. Rough Setting at 0.25mm layer height
2. Medium Setting at 0.2mm layer height – You should use this setting as default.
3. Fine Setting at 0.15mm layer height
4. Ultra-Fine at 0.1mm layer height
Please download the files, load each config file one by one and save each one of the as “Machina_PLA_v1.5.2_[SETTING]” where [SETTING] is one of rough/medium/fine/ultraFine. Make sure that for each config file you save all three of : Print Settings, Filament Settings and Printer Settings.
We highly recommend NOT to change settings unless you really know what you are doing. As well, these settings are tested and set to work well with Machina Corp XSeries 3D Printers with ColorFabb and Ultimachine PLA material but various factors such as humidity/air dryness/air drafts/ambient temperature/etc will impact your printing experience. ColorFabb and Ultimachine are the materials we recommend and we use in our testing. We cannot guarantee the machines will yield the same results with other materials not sold by us and/or tested by us.
The Google Drive interface will embed a menu; click on “File – Download” to download the entire folder.
Mk2 LCD Menu Downloads
Mk2 – LCD Menu Guide v1.1 -> Download PDF
GDrive Download ALL Software for Machina X-Series Mk0, Mk1, Mk1.5
Note: note the slic3r profiles for either Mk1.5 or Mk2; all Mk2s have 1.75mm, heatbed and a bed size to 250 x 210mm x 250mm height
Please use THIS GDRIVE download link and then download the files you need.