Desktop 3D Printers and Services - Canada

(587) 501-0859 3d@machinacorp.ca

Mk2 – Quick Start guide

Welcome and Congratulations on your purchase of the Machina Mk2 3D Printer

This guide will tell you how to get started super fast.
Before proceeding, make sure you have everything you need – see Mk2 Setup and Software – “What’s in the Box” section.

1. Power up your machine.

2. Load filament – spool should be coming out towards you.

3. On the LCD menu, push the knob wheel to bring up the menu, go to “Print from SD Card”

4. Select “P11_calibration…” file

5. Done. Machine will start the heating sequence and print a test print.

Useful Links:

See LCD Screen Display Guide
See LCD Menu Tree Guide